Language
- Simplified Chinese
- English

.

Home page

Electric Forklift Controller: Ushering in a New Era of Smart Logistics

2025/01/20

Turnstile Driver Application Cases

2023/11/15

Technical Principles and Application Analysis of Metro Turnstile Drivers

The metro turnstile actuator is a critical component of the turnstile system, responsible for driving the opening and closing of the gate. With the rapid development of metro transportation, the technology of turnstile actuators has also been continuously advancing to meet the growing demands for greater efficiency, safety, and reliability. I. Technical Principles of Metro Turnstile Actuators Metro turnstile actuators are typically based on motor-drive technology, using the torque generated by the motor to drive the movement of the gate. A variety of motor types are commonly used, including brushed DC motors, brushless DC motors, and stepper motors. These motors each have distinct characteristics in terms of control accuracy, service life, and noise levels, making them suitable for different application scenarios. In metro turnstiles, the motor is connected to the gate via a transmission mechanism—such as a reduction gearbox or gears—to convert the motor’s rotational motion into linear or rotary motion of the gate. At the same time, the actuator is equipped with sensors and a control system that continuously monitor the gate’s position and status, adjusting the motor output as needed to achieve precise gate control. II. Performance Characteristics of Metro Turnstile Actuators High-precision control: Metro turnstile actuators can achieve highly accurate position control, ensuring the stability and precision of the gate during both the opening and closing processes. High reliability: The actuator employs high-quality

2024/12/30

Partnering with Linde (China) to inject new momentum into the forklift industry.

2025/03/19

China’s Servo Drive Industry: Innovation-Driven, Moving Toward the High End

As the trends of “machine substitution for humans” and “domestic substitution” become increasingly prominent in China’s smart manufacturing sector, the domestic motion-control market continues to expand. Domestic enterprises and research institutions have steadily increased their R&D investment, achieving numerous breakthroughs in key technologies for servo drives.

2025/02/08

Future Trends in Intelligent Drive for Hub Servo Motors

Hub servo motors, as advanced drive units that integrate the motor, encoder, wheel, and tire into a single compact assembly, are increasingly becoming the core power source in fields such as intelligent robotics, automated guided vehicles (AGVs), and autonomous mobile robots (AMRs). I. Structural Principle of Hub Servo Motors A hub servo motor ingeniously integrates the servo motor directly into the wheel hub, making it the central component of the wheel. The motor itself consists primarily of two main parts: the stator and the rotor. The stator is fixed to the inner wall of the hub, while the rotor is mounted on the rotatable portion of the hub. When electric current passes through the stator windings, a rotating magnetic field is generated between the stator and the rotor, which in turn drives the rotor to rotate, enabling the wheel to move forward or backward with high efficiency. The encoder serves as the precision measuring device for the hub servo motor system; it is mounted on the motor shaft to collect real-time position and speed information and transmit this critical data to the drive unit. The drive unit acts as the control center, decoding and executing external commands by precisely regulating the current or voltage supplied to the motor, thereby ensuring that the motor operates at the desired speed and torque. II. Operating Characteristics of Hub Servo Motors Hub servo motors offer precise speed and position control, thanks to their built-in encoder and high-performance drive unit. Through

2024/12/18

DC Servo Motors: The Power Key to Mobile Robots

2024/12/16

The Intelligent Development of Turnstile Controllers

2024/12/12

Hub Servo Motors: Driving Efficient Power for the Future

Hub servo motors, as outstanding representatives of modern drive technology, are gradually becoming the core power source in numerous fields. They achieve a high degree of integration among key components such as the motor, encoder, gearbox (though some designs may drive directly without a gearbox), wheel, and tire, thereby not only simplifying the complexity of traditional drive systems but also significantly enhancing drive efficiency and performance. I. Operating Principle of Hub Servo Motors The operating principle of hub servo motors is based on a feedback control system. An encoder serves as the feedback sensor, providing the control unit with real-time information on the current position of the drive shaft. When a control signal is issued, the motor’s rotor responds rapidly and begins to rotate; simultaneously, the encoder feeds back the rotor’s position data to the servo drive, forming a closed-loop control system. This mechanism enables hub servo motors to precisely control rotation angle, speed, and torque, thus achieving accurate positioning and motion control. II. Advantages of Hub Servo Motors High Integration: Hub servo motors integrate multiple critical components into a single unit, greatly simplifying the structure of the drive system and reducing both its complexity and maintenance costs. High Efficiency and Energy Savings: By minimizing energy consumption and losses associated with transmission components, hub servo motors boast a higher energy-efficiency ratio, enabling substantial reductions in energy use.

2024/12/10

DC Servo Motors: Unlocking a New Growth Engine for the Mobile Robotics Market

2024/12/10

Valuable insights: A one-minute guide to Shenzhen hub servo motor manufacturers.

As an important component of China’s motor manufacturing industry, Shenzhen hub servo motor manufacturers have long enjoyed widespread attention from all sectors of society. With continuous technological advancement and expanding market demand, the development prospects of these manufacturers are increasingly drawing the focus of industry insiders. 1. Cutting-edge technology serves as a powerful driver of growth. Shenzhen hub servo motor manufacturers have consistently been at the forefront of the industry in terms of technological innovation, injecting strong technological momentum into China’s motor manufacturing sector. The ongoing improvement of servo motor technology has not only significantly enhanced motor efficiency and operational stability but has also opened up broader market opportunities for these manufacturers. 2. Expanding market demand. As manufacturing continues to develop and living standards rise, the products manufactured by Shenzhen hub servo motor companies are now widely used across a broad range of industries—ranging from electronics and mechanical engineering to defense-related applications and marine equipment support. Consequently, market demand for these products is steadily growing, with enormous future potential. 3. Rising brand reputation. In the face of intense market competition, these manufacturers continuously enhance product quality and strengthen their brand image, earning widespread recognition and trust from consumers. As a well-established manufacturer with many years of history, Shenzhen hub servo motors have always adhered to a customer-

2023/03/23

Future Development Trends of Servo Motors

As technology continues to advance, the performance and quality of servo motors will steadily improve. At the same time, the accelerating pace of domestication will enhance the competitiveness of Chinese brands in the global market.

2024/12/02

< 1 2 3 4...18 > proceed page

WeChat QR code

+86-13684985270

Email: sales@jiayume.com

Email 2: zschenjy@jiayume.com
Website address:http://www.jiayume.com/

Complaint Hotline: 13823397496
Sales Consulting : 13684985270
Add: 501, Floor 5, No. 25, Qunhui Road, District 72, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen

中企跨境-全域组件 2.0.4 制作前进入CSS配置样式

导航下拉添加类名.active

在线客服添加返回顶部

右侧在线客服样式 1,2,3 1

图片alt标题设置： Shenzhen Jiayu Mechatronic CO., Ltd

表单验证提示文本： Content cannot be empty!

循环体没有内容时： Sorry, no matches found.

CSS / JS 文件放置地