09
2023
-
08
In which applications do servo motors need to be paired with gear reducers?
Author:
In which applications do servo motors need to be paired with gear reducers?
Servo motor When the rated speed differs significantly from the actual operating speed, and deep speed regulation is required to meet the speed requirement, it is recommended to use a reducer; otherwise, the servo motor will likely have to be selected with a higher power rating.
Alternatively, the servo motor must be capable of driving a load with a relatively high torque; this is achieved by incorporating a reducer to increase the output torque. The dynamic performance tuning of the servo system requires that the ratio of the servo motor rotor inertia to the load inertia be within
Within a certain range, if the motor’s rotor inertia does not match the required inertia ratio, a gearbox can be considered. After isolation by the gearbox, the equivalent inertia ratio will be proportional to the square of the gearbox’s gear ratio, i².
This achieves the purpose of inertia matching.
Servo motor,Reducer
undefined
WeChat QR code
+86-13684985270
Email: sales@jiayume.com
Email 2: zschenjy@jiayume.com
Website address:http://www.jiayume.com/
Complaint Hotline: 13823397496
Sales Consulting : 13684985270
Add: 501, Floor 5, No. 25, Qunhui Road, District 72, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen
Copyright @ 2026. All rights reserved. Shenzhen Jiayu Mechatronic CO., Ltd